Evolution EVO355 Raptor Cut Off Saw

This superb Cut Off Saw cuts through mild steel without heat, burrs or coolant. Utilising a powerful 2200-watt motor, the RAPTOR can handle even the most demanding on-site jobs.

The RAPTOR slices its way through mild steel with ease, the cut is extremely quick and clean. The cutting capacity is incredible too - 120mm x 120mm steel box section with a 6mm wall thickness.

This no-nonsense machine is economical in its performance as well; typically an EVO355 Raptor blade averages a jaw-dropping 1000 cuts in 50mm x 50mm mild steel with a wall thickness of 3mm.

This saw is a true powerhouse and gives the end-user tremendous scope when it comes to cutting steel on a production basis.

Motor (230v or 115v 50/60 Hz) (Watts)	2200
RPM No Load (min -1)	1450
Recommended Maximum Duty Cycle (Minutes)	30
Sound Pressure Level (Under Load) (dB(A))	112.4
Weight (Kg)	23.0
Maximum Dimensions (mm)	H 575 W 355 D 600
Maximum Box Cut Capacity 90° (6mm Wall)
Square (mm)	120 x 120
Rectangle (mm)	95 x 180
Round (mm)	130
Maximum Box Cut Capacity 45° (6mm Wall)
Square (mm)	89 x 89
Rectangle (mm)	78 x 110
Round (mm)	105

Blade Specifications
Maximum Diameter (mm)	355
Bore Diameter (mm)	25.4
Maximum Thickness (mm)	2

- Amazing Evolution 355 Raptor cut off saw with a 355mm (14") diameter TCT blade.

- Designed to cut steel, aluminium, and stainless steel without heat, burrs or coolant.

- Powerful 2200 watt 1300rpm motor copes with the heaviest of work. Earth grounded.

- Maximum box cutting capacity 120mm (4-3/4") x 120mm (4-3/4") and wall thickness 6mm (1/4").

- Long life blade averages 800 cuts of 50mm (2") x 50mm (2") and wall thickness 3mm (1/8") mild steel.

- Includes, blade guard, operators manual, and goggles.

- High quality construction with 12 months warranty.

Includes:

1 Guard 1 Jig Plate 1 8mm Hex Wrench 1 6mm Hex Wrench 1 Safety Goggles